Wafer Type Butterfly Valve

Jupiter Controls valves Type Center Disc Rubberlined Zero Leakge Butterfly Valve have been developed with extensive application, design and manufacturing expertise. Jupiter Controls High Performance Slim-Seal, Concentric design Butterfly Valves are reliable, maintenance free shutoff with permanently gas-tight seal with an integrally moulded elastomer body liner. Jupiter Controls Butterfly Body having two nos. flange locating holes for sizes up to 12” and from size 14” and above 04 nos. for easy alignment of valve during installation. Flange locating hole confirm to as per ANSI B 16.5 Class 125 & Class 150 / BS 10 Table PN 6, PN 10, PN 16 or other international standard. Jupiter Controls High performance butterfly valves are also available with Full-Lugs type body with raised faces and flanged ends connection on request.

Jupiter Controls Butterfly Valves are Wafer Type, Slim-Seal design, center disc, maintenance free shutoff. This wafer butterfly valves excess other conventional valves such as gate valve and globe valves in all aspects, especially in terms of light weight, less number of component, no flange gaskets required and economical operation and maintenance costs.

Jupiter Controls Slim Seal design flangless sandwich type Butterfly Valves body seat mechanism have a very low torque, tight shut off with zero leakage, compact actuator selection, and long life smooth easy operation. The slim-seal, center disc design valves are widely available with different combination of body, seat & disc materials to satisfy the need of most industrial application.We manufacture and exporting zero leakge concentric disc butterfly valve with variety of elastomer rubber seat to suit various industrial application. Our seat range of elastomer covers EPDM, NBR, Buna-N, Nitirle, Silicon, Viton, Hypalon, PTFE, FEP, PFA etc. Our Size range of Butterfly Valve cover up to 78"" Size.Wafer Type Center Disc Butterfly Valve as per BS 5155,Wafer Type Center Disc Butterfly Valve as per API 609,Wafer Type Center Disc Butterfly Valve as per AWWA C 504,

Wafer Type Butterfly Valve Flow Control Lever Operated,Wafer Type Butterfly Valve Gear Actuator Operated,Wafer Type Butterfly Valve Pneumatic Actuator Operated,Wafer Type Butterfly Valve Electrical Actuator Operated, Jupiter Controls  also manufacturing Aluminium Bronze & SS 316L Butterfly Valve for Sea Water & Corrosive application. We have gopd experience of valve in a same field. We are also suppying valve with Stainless Steel Hand Lever, Stainless Steel Gear & Stainless Pneumatic Actuator body for very corrosive application.

Jupiter Controls Butterfly Valves are generally supplied with manual flow control hand lever operation up to 8” and above size valve gear unit operated. Jupiter Controls also offering Butterfly Valves with either Pneumatic or Electrical actuator operated for automation. 

We are also manufacturing of Quarter Turn Worm Gear Operated Butterfly Valve, Pneumatic Actuated Butterfly Valves, Pneumatic Actuator Operated Rubberlined Butterfly Valves, Double Acting Actuator Operated Center Disc Butterfly Valve, Single Acting Spring Return Actuator Operated Wafer Type  Butterfly Valve, Electrical Actuator Operated Butterfly Valve, Motorized Butterfly Valve, Remote Operated Butterfly Valve, On-Off Butterfly Valve, Butterfly Control Valve, Modulating Type Butterfly Valve, We can do provide any of automation in Butterfly Valve.  We have more then 8 years of experience industrial process system field automation. Butterfly Valve can also available with accessories like Gear Box, Solenoid Valve, Air Filter Regulator, Silence, Manual Override, Valve Positioners, Relay etc. We are one of the leading Butterfly Valve Manufacturers Exporters Supplier Stockiest in India.

Lug Type Butterfly Valve

Jupiter Controls  valve Lug Type Butterfly Valve body seat design have a very low torque, tight shut off with zero leakage, which is very useful to select compact model of actuator, and long life smooth easy operation. The Lug type, center disc design, rubber lined Butterfly Valves are widely available with variety of body, seat & disc materials to suit most industrial application.

Jupiter Controls valve Center Disc Lug Type Body bonded seat Butterfly Valve has Slim-Seal design, maintenance free shutoff. Lug Type Body Center Disc Butterfly Valves by Jupiter Controls are high performance solutions to your industrial Butterfly Valve needs. Lug Type Butterfly Valve is available size from 1-1/2” to 78” in various body, disc & seat materials. Center Disc Lug Type Butterfly Valves also available with Worm - Gear, Pneumatic Actuator or Electrical Actuator Operated, Our Lug Type Center Disc Butterfly Valves are always manufactured with the strongest, durable and long-life materials, like: Stainless Steel, Carbon Steel, Ductile Iron, Cast Iron, Aluminum, and available in different styles. The difference between a Wafer and Lug type body Butterfly valve is only the provision of mounting of valve at pipeline. Lug type valve has lugs that are used to mount the valve to lugs that are attached the flanges on then ends of sections of pipe so that each length of pipe can be removed and replaced independently. Lug Type Butterfly Valve have main advantage is you can disconnect any flange of pipeline.

We are also manufacturing of Quarter Turn Worm Gear Operated Lug type rubberlined Butterfly Valve, Pneumatic Actuated Full Lug Type Butterfly Valves, Pneumatic Actuator Operated Rubberlined Lug Type Butterfly Valves, Double Acting Actuator Operated Center Disc Lug Type Butterfly Valve, Single Acting Spring Return Actuator Operated Lug Type  Butterfly Valve, Electrical Actuator Operated Lug Butterfly Valve, Motorized Lug Body Butterfly Valve, Remote Operated Lug Type Butterfly Valve, On-Off Lug Type Butterfly Valve, Lug Butterfly Control Valve, Modulating Type Lug Butterfly Valve India, We can do provide any type of automation in Lug Butterfly Valve.  We have more then 8 years of experience industrial process system field automation. Butterfly Valve can also available with accessories like Gear Box, Solenoid Valve, Air Filter Regulator, Silence, Manual Override, Valve Positioners, We are one of the leading Butterfly Valve Manufacturer Exporter Supplier Stockiest in India

Double Flanged End Butterfly Valve

Jupiter Controls double flanged all Butterfly Valve seating design bonded / mouling type. Double Flanged Butterfly Valve size range start from 2”  to 102”. Flange drilling accordance  Jupiter Controls also offer Flangd End Butterfly Valve with Manual operators (worm gears), pneumatic rotary quarter turn actuator, electric actuators and all associated accessories. Double Flanged butterlfy valve is best option to save cost of valve,Double Flanged Butterfly Valve as per BS 5155,Double Flanged Butterfly Valve as per API 609,Double Flanged Butterfly Valve as per AWWA C 504,Flanged End Butterfly Valve Flow Control Lever Operated,Flanged End Butterfly Valve Gear Actuator Operated,Flanged End Butterfly Valve Pneumatic Actuator Operated,Flanged End Butterfly Valve Electrical Actuator Operated,

Off-Set Disc Butterfly Valve Flanged End

Jupiter Controls offer offset disc Butterfly Valves size from 14”(350NB) to 64”(1600NB) with various choice of Body, Disc & Seat Materials. Double Flanged eccentric disc Butterfly valve also known by the name of High Performance eccentric disc Butterfly Valves, have the shaft mounted slightly offset from the pipe centerline, and the shaft is mounted behind the sealing band of the seat.  The seat is a narrow resilient band is clamped in the body and must be resilient. Elastomer (RUBBER) is resilient enough to seal, and the disc only wipes the seat for a few degrees of travel at seating. As the disc is offset from the shaft, there is a lot of metal in the flow stream in the wide-open position, and double-offset valves have somewhat less maximum capacity than flat-disc, non-offset valves.  Butterfly Valve can be used in bi-directional pressure differential to prevent backflow in systems designed for unidirectional flow. Wafer Bonded/Renewable Seat Butterfly Valve no requirement of any gasket to mount between two flanges. Jupiter Controls Valves are available with wider range of Elastomer Rubber Seat to suit various industrial applications with various operations. Jupiter Controls Valve design is as per BS 5155 / API 609 / AWWA C 504 and Test Standard BS EN ISO 12266-I (BS 6755-I) & API 598

PTFE Lined Butterfly Valve 

Jupiter Controls of PTFE Lined Butterfly Valves for corrosion & acidic application. Our PTFE/FEP/PFA Teflon lined valves are available from 3”(80NB) to 12”(300NB) We also supply PTFE Lined Butterfly Valve Motorized Electrical Actuator Operated or Pneumatic Actuator Operated quarter turn valves. Jupiter Controls PTFE Lined Butterfly Valves are compact in size, light-weight and are ideal to use in wide pressure range. They may be used in a wide variety of chemical services; they are superior corrosion resistance over a wide range of corrosive chemicals. Jupiter Controls teflon lined butterfly valve design is center disc, split body, wafer type, flangeless.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Salient Features:

  • Concentric, Slim-Seal Design

  • Greater Sealing Capacity

  • Soft Seat Design

  • Lower Torque with any fluid

  • Permanently tight closure

  • Bi-Directional Valve

  • Optimum operation under Vacuum Condition

  • Suitable for On-off as well as Throttling Service

  • Materials for almost all media

  • Short Face To Face Dimension

  • Wafer Design Body

  • Long Service Life

  • Smooth, Easy Operation

  • Maintenance Free Version

  • Less Weight, Easy To Install

Design & Testing International Standard:

Valve Design                        : BS 5155 / API 609

Pressure Testing                  : BS 6755-I / API 598

Face To Face                        : ANSI B 16.10

Flange Drilling                     : ANSI B 16.5 / BS 10 Table / DIN / IS 6392

Pressure Rating                   : PN 10 / PN 16

Size Range                           : 40NB to 600NB

Operation                              : Up to 250NB Flow-Control Lever Operated

                                               and above Gear Operated. On special request Gear

                                               Operation also available from 80NB size.

Special Options:

Off Set Disc Design Butterfly Valve for high pressure & temperature service.

Moulded / Replaceable Seat option

Gear / Pneumatic Rotary Actuator Operated

P.T.F.E. (PFA/FEP) Lined Butterfly Valve

Flanged End, Butterfly Valve

Damper Type Butterfly Valve for High Temperature Air Service

Off Set Disc Design Butterfly Valve for high pressure & temperature service

Tailor Made Valve

Material of Construction:

Body

☼ Cast Iron to ASTM A 126 Class B

                        IS 210 GR. FG 200 / 220 / 260

☼ Ductile Iron to ASTM A 536 Grade 65-45-12

☼ Cast Carbon Steel to ASTM A 216 GR. WCB

☼ Stainless Steel to ASTM A 351 GR. CF 8 / 8M / 3 / 3M

Disc

☼ Cast Iron to ASTM A 126 Class B

                        IS 210 GR. FG 200 / 220 / 260

☼ Ductile Iron to ASTM A 536 Grade 65-45-12

☼ Cast Carbon Steel to ASTM A 216 GR. WCB

☼ Stainless Steel to ASTM A 351 GR. CF 8 / 8M / 3 / 3M

☼ Aluminium Bronze ASTM B 148-C95400

☼ Nylon Coating on C.I. / D.I. / WCB / S.S. Disc Material

☼ EPDM / Neoprene / Hypalon ® / Nitrile Rubber / Buna-N Rubber

     Encapsulated on C.I. / D.I. / WCB / S.S. Disc Material

☼ P.T.F.E. (PFA / FEP) Lined on C.I. / D.I. / WCB / S.S. Disc Material

Stem

☼ AISI 410 (S.S. 410 – 13% Cr. Steel)

☼ AISI 304 (S.S. 304)

☼ AISI 316 (S.S. 316)

☼ AISI 304L (S.S. 304L)

☼ AISI 316L (S.S. 316L)

☼ Carbon Steel to BS 970

Seat

☼ EPDM

☼ EPDM Food Grade

☼ Buna – N

☼ Black Nitrile

☼ Neoprene

☼ Hypalon ®

☼ Silicon

☼ Viton ®

☼ P.T.F.E.

Standard Test:

Body Test

1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test.

Seat Test

1.5 times the working pressure with water.

Function / Operation Test

At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test (Open/Close). This test carried out without pressure and at ambient temperature. It ensures the correct operation of the valve / actuator assembly with accessories such as solenoid valve, limit switches, air filter regulator etc.

Special Test

On request, any other test can be carried out according to special instruction by client

Application:

  • Water Treatment Plant

  • Paper Industry

  • Sugar Industry

  • Breweries

  • Chemical Industry

  • Waste Effluent Treatment Plant

  • Drilling Rigs

  • Gas Plant

  • Cooling Water Circulation

  • Heating & Air Conditioning

  • Pneumatic Conveyors

  • Compressed Air

 

Wide Range of Industrial Butterfly Valve Manufacturers 

Cast Iron Butterfly Valve Manufacturer, Cast Carbon Steel Butterfly Valve Manufacturers, Cast Stainless Steel Butterfly Valve Exporter, Slim-Seal Design Butterfly Valve Supplier, Rubber lined Butterfly Valve Stockiest,  P.T.F.E. lined Butterfly Valve Manufacturer, Wafer Type Butterfly Valve Manufacturers, Damper type Butterfly Valve Exporter, High Performance Butterfly Valve Manufacturer, Center Disc Butterfly Valve Manufacturers,      Off-Set Disc Butterfly Valve Exporter, Gear operated Butterfly Valve Supplier, Pneumatic operated Butterfly Valve Stockiest, Electrical operated Butterfly Valve Manufacturer, Zero Leakage Butterfly Valve Manufacturers,       Double Flange Type Butterfly Valve Manufacturer, Butterfly Valve In Punjab, Butterfly Valve Manufacturer in Haryana, 

Wafer Type Butterfly Valve Dealer in Gujarat
Wafer Type Butterfly Valve Dealer in Tamil Nadu
Wafer Type Butterfly Valve Dealer in Maharashtra
Wafer Type Butterfly Valve Dealer in Haryana
Wafer Type Butterfly Valve Dealer in Karnataka
Wafer Type Butterfly Valve Dealer in Delhi 
Wafer Type Butterfly Valve Dealer in Andhra Pradesh
Wafer Type Butterfly Valve Dealer in Orissa
Wafer Type Butterfly Valve Dealer in Uttar Pradesh
Wafer Type Butterfly Valve Dealer in Madhya Pradesh
Wafer Type Butterfly Valve Dealer in Vadodara
Wafer Type Butterfly Valve Dealer in Coimbatore
Wafer Type Butterfly Valve Dealer in Mumbai
Wafer Type Butterfly Valve in Navi Mumbai
Wafer Type Butterfly Valve Dealer in Mahape
Wafer Type Butterfly Valve in Chennai
Wafer Type Butterfly Valve Dealer in Surat
Wafer Type Butterfly Valve Dealer in Ahmedabad
Wafer Type Butterfly Valve Dealer in Gurgaon
Wafer Type Butterfly Valve Dealer in Noida
Wafer Type Butterfly Valve Dealer in New Delhi

Wafer Type Butterfly Valve Dealer in Punjab

Wafer Type Butterfly Valve Dealer in Uttarakhand

Wafer Type Butterfly Valve   Dealer in Himachal Pradesh

Wafer Type Butterfly Valve Dealer in Rajasthan